Product Description
CHTR Precision Launches New 6-Meter Single-Piece Rails
- HG35 linear slide rail Dustproof Accessories
In the presence of dust and iron,if there is foreign matterin thelinea r motion systemof the slider, it may cause abnormal wear inside the slider, shorten the service life and affect the smoothness of the linear motion of the slider. Measures to prevent the entryofforeign matter. - The Seal code of CHTR hg35 linear slide rail
U:Precision detection equipmen and other dust-free environment
UU:Conventional sealingoccasions
ZZ:There are iron,used in dust,sparks,impurities andotheroccasions
DD:Used indust,impurities,precision machining and other occasions
KK:Used in environments withdust, iron filings sparks, impurity graphite, etc
CHTR hg35 hiwin guide rail have Five accuracy grades for choose
The accuracy of each type is separated into :Normal, High, Precision,Senior Precisjon,Top Precisjon.
The following are the precision grades recommended for the application.
| Machine Type | Accuracy Class | Machine Type | Accuracy Class | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| N | H | P | SP | UP | N | H | P | SP | UP | ||
| Machining Cwnter | | | √ | √ | | Orthogonal Coordinate | √ | √ | | | |
| Turning Lathe | | | √ | √ | | Cylindrical Coordinate | √ | √ | | | |
| Milling Machine | | | √ | √ | | Line Adapter | | √ | √ | | |
| Boring Machine | | | √ | √ | √ | Detector | | | √ | √ | |
| Jig-Boring Machine | | | | √ | √ | Electronic Component Insertion Machine | √ | √ | | | |
| Grinding Machine | | | √ | √ | √ | Printed Circuit Board Tapping Machine | √ | √ | √ | | |
| Electrical Discharge Machine | | √ | √ | | | Injection Moulding Machine | √ | √ | | | |
| Pressing Machine | | √ | √ | | | Three Dimensional Measuring Instrument | | | √ | √ | |
| Laser Processing Machine | √ | √ | √ | | | Office Machine | √ | √ | | | |
| Woodworking Machine | √ | √ | √ | | | Transmission Machine | √ | √ | | | |
| NC Drilling Machine | | √ | √ | | | XY Work Table | √ | √ | √ | | |
| Tapping Center | | √ | √ | | | Coating Machine | √ | √ | | | |
| Container Switching Device | √ | | | | | Welding Machine | √ | √ | | | |
| ATC | √ | | | | | Medical Machine | √ | √ | | | |
| Wire Eletrical Discharge Machine | | √ | √ | | | Digitizer | √ | √ | √ | | |
| Wheel Dressing Device | | | √ | √ | | Checking Device | | √ | √ | √ | |
Size Accuracy Inspection of TRHG Linear Guide
| ||||||
|---|---|---|---|---|---|---|
| Model Code | Accuracy spefication | Normal | High | Precision | Senior Precision | Top Precision |
| N | H | P | SP | UP | ||
| TRHG35 | allowable error of heightsize M | ±0.1 | ±0.04 | 0 -0.04 | 0 -0.02 | 0 -0.01 |
| allowable mutual error of height size M in pairs | 0.02 | 0.015 | 0.007 | 0.005 | 0.003 | |
| allowable error of width size W2 | ±0.1 | ±0.04 | 0 -0.04 | 0 -0.02 | 0 -0.01 | |
| allowablemutua error of width size W2 n pairs | 0.03 | 0.015 | 0.007 | 0.005 | 0.003 | |
Installation Step of Guideway
| A:check the mounting surface
| B:Set thereference side ofguidewayopposite to the reference side of installing step
|
| C:check the position of the bolt hole, to determine the correct position.
| D:Preloading to fix the bolt,make the reference-side of guideway
closely connectto the side of installing step.
|
| E:Finally screw down the bolt
| F:Tightened the fastening screws ofblock in turn
|
| >>More installation methods for linear guide blocks | |
Specificationof TRHG Sereis(High Assembly)
<
 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Physical Dimension(mm) | Block Dimension(mm) | Crease Nipple Specification | ||||||||||
| M | W | L | B | C | S | L1 | T | T1 | H1 | N | G | ||
| TRHG35AC | 48 | 100 | 113.9 | 82 | 62 | M10 | 80.5 | 20 | 14 | 8.1 | 8 | 12 | G-M6 |
| TRHG35ACL | 48 | 100 | 139.2 | 82 | 62 | M10 | 105.8 | 20 | 14 | 8.1 | 8 | 12 | G-M6 |
| TRHG35B | 55 | 70 | 113.9 | 50 | 50 | M8×12 | 80.5 | 12 | - | 8.1 | 15 | 12 | G-M6 |
| TRHG35BL | 55 | 70 | 139.2 | 50 | 72 | M8×10 | 105.8 | 12 | - | 8.1 | 15 | 12 | G-M6 |
| Model | Rail Dimension(mm) | Basic Load Rating | Allowable Static Moment | Weight | |||||||||
| W1 | W2 | M1 | F | d1×d2×h | Dynamic (KN) | Silence (KN) | MA KN-M | MB KN-M | MC KN-M | Block (kg) | Rail (kg/m) | ||
| TRHG35AC | 34 | 33 | 29 | 80 | 9×14×12 | 49.52 | 102.87 | 1.2 | 1.2 | 1.73 | 1.62 | 6.6 | |
| TRHG35ACL | 34 | 33 | 29 | 80 | 9×14×12 | 60.21 | 136.31 | 2.08 | 2.08 | 2.29 | 2.08 | 6.6 | |
| TRHG35B | 34 | 18 | 29 | 80 | 9×14×12 | 49.52 | 102.87 | 1.2 | 1.2 | 1.73 | 1.54 | 6.6 | |
| TRHG35BL | 34 | 18 | 29 | 80 | 9×14×12 | 60.21 | 136.31 | 2.08 | 2.08 | 2.29 | 1.99 | 6.6 | |
Related Products
CHTR hiwin hg55 linear guides and rails manufacturing in china
CHTR linear guides and rails as a direct alternative to HIWIN linear guides
CHTR hgw45cc/hgw45hc/hgr45r hiwin company linear bearing rail
CHTR linear bearing rail as a direct alternative to HIWIN linear guides
CHTR hgr30 hiwin guide rail cnc rail china manufacturing company
CHTR Guide Rails as Replacements for HIWIN Guide Rails
CHTR hiwin hgr25 linear bearings and rails china factory
CHTR Guide Rails as Alternatives to HIWIN Guide Rails