Product Description
CHTR Precision Launches New 6-Meter Single-Piece Rails
- CHTR hg30 hiwin guide rail is Easy Installation
Low requirements ofinstallation guide for TRHG users, itis easyforinstallation and debugging - CHTR hg30 hiwin guide rail is With automatic self-aligning capability
Arc groove design of the front combination makes the CHTR hg30 hiwin guide rail has the ability to automatically adjust the center, even if to give preloading it can absorb installation error, and maintains a high precision,smooth and stablelinear motion.
CHTR hg30 hiwin guide railhave Five accuracy grades for choose
The accuracy of each type is separated into :Normal, High, Precision,Senior Precisjon,Top Precisjon.
The following are the precision grades recommended for the application.
| Machine Type | Accuracy Class | Machine Type | Accuracy Class | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| N | H | P | SP | UP | N | H | P | SP | UP | ||
| Machining Cwnter | | | √ | √ | | Orthogonal Coordinate | √ | √ | | | |
| Turning Lathe | | | √ | √ | | Cylindrical Coordinate | √ | √ | | | |
| Milling Machine | | | √ | √ | | Line Adapter | | √ | √ | | |
| Boring Machine | | | √ | √ | √ | Detector | | | √ | √ | |
| Jig-Boring Machine | | | | √ | √ | Electronic Component Insertion Machine | √ | √ | | | |
| Grinding Machine | | | √ | √ | √ | Printed Circuit Board Tapping Machine | √ | √ | √ | | |
| Electrical Discharge Machine | | √ | √ | | | Injection Moulding Machine | √ | √ | | | |
| Pressing Machine | | √ | √ | | | Three Dimensional Measuring Instrument | | | √ | √ | |
| Laser Processing Machine | √ | √ | √ | | | Office Machine | √ | √ | | | |
| Woodworking Machine | √ | √ | √ | | | Transmission Machine | √ | √ | | | |
| NC Drilling Machine | | √ | √ | | | XY Work Table | √ | √ | √ | | |
| Tapping Center | | √ | √ | | | Coating Machine | √ | √ | | | |
| Container Switching Device | √ | | | | | Welding Machine | √ | √ | | | |
| ATC | √ | | | | | Medical Machine | √ | √ | | | |
| Wire Eletrical Discharge Machine | | √ | √ | | | Digitizer | √ | √ | √ | | |
| Wheel Dressing Device | | | √ | √ | | Checking Device | | √ | √ | √ | |
Size Accuracy Inspection of TRHG Linear Guide
| ||||||
|---|---|---|---|---|---|---|
| Model Code | Accuracy spefication | Normal | High | Precision | Senior Precision | Top Precision |
| N | H | P | SP | UP | ||
| TRHG30 | allowable error of heightsize M | ±0.1 | ±0.04 | 0 -0.04 | 0 -0.02 | 0 -0.01 |
| allowable mutual error of height size M in pairs | 0.02 | 0.015 | 0.007 | 0.005 | 0.003 | |
| allowable error of width size W2 | ±0.1 | ±0.04 | 0 -0.04 | 0 -0.02 | 0 -0.01 | |
| allowablemutua error of width size W2 n pairs | 0.03 | 0.015 | 0.007 | 0.005 | 0.003 | |
Installation Step of Guideway
| A:check the mounting surface
| B:Set thereference side ofguidewayopposite to the reference side of installing step
|
| C:check the position of the bolt hole, to determine the correct position.
| D:Preloading to fix the bolt,make the reference-side of guideway
closely connectto the side of installing step.
|
| E:Finally screw down the bolt
| F:Tightened the fastening screws ofblock in turn
|
| >>More installation methods for linear guide blocks | |
Specificationof TRHG Sereis(High Assembly)
<
 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Physical Dimension(mm) | Block Dimension(mm) | Crease Nipple Specification | ||||||||||
| M | W | L | B | C | S | L1 | T | T1 | H1 | N | G | ||
| TRHG30AC | 42 | 90 | 96.5 | 72 | 52 | M10 | 70.5 | 18 | 12 | 6.2 | 7 | 12 | G-M6 |
| TRHG30ACL | 42 | 90 | 119 | 72 | 52 | M10 | 93 | 18 | 12 | 6.2 | 7 | 12 | G-M6 |
| TRHG30B | 45 | 60 | 96.5 | 40 | 40 | M8×10 | 70.5 | 12 | - | 6.2 | 10 | 12 | G-M6 |
| TRHG30BL | 45 | 60 | 119 | 40 | 60 | M8×10 | 93 | 12 | - | 6.2 | 10 | 12 | G-M6 |
| Model | Rail Dimension(mm) | Basic Load Rating | Allowable Static Moment | Weight | |||||||||
| W1 | W2 | M1 | F | d1×d2×h | Dynamic (KN) | Silence (KN) | MA KN-M | MB KN-M | MC KN-M | Block (kg) | Rail (kg/m) | ||
| TRHG30AC | 28 | 31 | 26 | 80 | 9×14×12 | 38.74 | 76 | 0.88 | 0.88 | 0.87 | 0.83 | 3.3 | |
| TRHG30ACL | 28 | 31 | 26 | 80 | 9×14×12 | 47.27 | 83.06 | 0.85 | 0.85 | 1.06 | 1.11 | 4.8 | |
| TRHG30B | 28 | 16 | 26 | 80 | 9×14×12 | 38.74 | 83.06 | 0.85 | 0.85 | 1.06 | 0.91 | 4.8 | |
| TRHG30B | 28 | 16 | 26 | 80 | 9×14×12 | 47.27 | 110.13 | 1.47 | 1.47 | 14 | 1.18 | 4.8 | |
